As a small-business owner who’s spent the last seven years supplying auxiliary equipment for 3D printers, I’ve lost count of how many times I’ve sat across from a new user—whether a hobbyist running a single Ender 3 in their garage or a startup cranking out custom parts for local furniture makers—who says, “My printer works fine without all that extra gear.” Half of them come back a month later, frustrated because their prints are failing mid-layer, warping so bad they can’t remove the part, or their filament is crusted with moisture that ruined a $50 spool. Auxiliary Equipment

I get it. When you first unbox a 3D printer, the instruction manual skips over most auxiliary gear—focused instead on getting you to print your test cube as fast as possible. But what most new users (and even some veterans) don’t realize is that auxiliary equipment isn’t just “extra stuff”; it’s what turns a finicky machine that works 30% of the time into a reliable tool that works 90% of the time. Let’s break down the gear you actually need, and why you shouldn’t sleep on any of it.
First, let’s talk filament. Filament is the raw material, but it’s also the most common culprit for bad prints. If you’ve ever noticed stringing between parts, layers that lift, or a nozzle that clogs out of nowhere, odds are your filament has absorbed moisture from the air. That’s a huge problem with materials like PLA, PETG, nylon, and TPU—nylon, in particular, is like a sponge. Even a week in a damp garage can ruin a spool. The fix? A filament dryer.
I don’t mean those $20 “food dehydrator hacks” you’ll see on Reddit—those work in a pinch, but they’re inconsistent, hard to regulate, and can overheat and break down filament, especially for high-temperature materials. A proper desktop filament dryer, the kind we supply, lets you set a specific temperature (usually between 40°C and 80°C, depending on the material) and humidity level. For example, nylon needs 60°C and a humidity level below 10% to stay usable; PETG needs 50°C. Without that, you’re wasting 20-30% of every spool on prints that fail before they finish. We’ve had a guy who printed 12 test cubes a week for three months before he bought a dryer—turns out every single one was failing because of moisture in his PETG, and he’d thrown $180 down the drain. That’s the kind of avoidable cost we help cut.
Next up: enclosure. If you’re printing any material that needs consistent heat to prevent warping—ABS, ASA, polycarbonate, even large PETG parts—an open-frame printer just won’t cut it. I’ve seen someone print a prototype car bumper part on an open printer, then go grab a soda, come back, and find the part warped into a shape that looked like a potato. ABS, in particular, has a low glass transition temperature; if the temperature inside the print chamber drops even 5°C mid-print, the part will crack or warp.
An enclosure doesn’t have to be a huge, expensive metal box. We supply affordable, lightweight enclosures that fit most common desktop printers, with ventilation ports for fumes (important, because ABS and ASA release small amounts of volatile organic compounds) and a clear panel so you can watch your print. The other big benefit of an enclosure is it stabilizes the temperature around the print bed, which also helps with first layer adhesion. For hobbyists printing small parts, a $150 enclosure pays for itself in a month by saving ruined prints. For commercial users, it’s non-negotiable—your clients won’t accept a warped part, and OSHA has guidelines for fume exposure that enclosures help meet.
Then there’s print bed leveling and adhesion aids. Even with a perfectly level printer, small variations in the bed (or how you mount it) can cause the first layer to be too close (nozzle scratches the bed) or too far (filament doesn’t stick, so the print lifts mid-layer). Manual bed leveling works if you’re super meticulous, but it’s a huge time drain, and it’s easy to miss a spot. ABL, or Automatic Bed Leveling, is an auxiliary tool that uses a sensor to scan the bed in multiple points, adjust the nozzle height for every print, and eliminate that variability.
But ABL isn’t a “set it and forget it” deal. You still need a good bed surface to adhere the first layer. That’s where adhesion aids come in: hairspray, glue stick, PEI sheets, glass bed coatings. We supply a line of PEI sheets—they’re reusable, create a strong adhesion that lets you remove parts easily once they cool, and work with most materials better than glue or hairspray. We’ve also had users who tried to print on glass without anything, and their parts stuck so hard they had to chisel them off, ruining both the part and the bed. A good adhesion aid pairs with ABL to cut down your prep time from 10 minutes to 1, and reduces failed first layers by 70%.
What about post-processing? Let’s be real: most 3D prints come off the bed with layer lines, rough edges, and sometimes support structures that leave marks. If you’re making parts for sale, or even just giving custom prints as gifts, you need post-processing tools to finish them. The most common ones are support removal tools, sanders, and curing equipment.
Support structures are necessary for overhangs, but removing them without damaging the part is tricky. We supply a set of precision flush cutters and needle files that are designed for 3D prints—they’re sharp enough to cut through PLA support without leaving a big mark, unlike regular craft cutters that can split the part. For soluble supports (like PVA, which dissolves in water), a heated water bath with a small circulation pump cuts the dissolve time from 24 hours to 4 hours, which is a huge time saver.
Then there’s curing. For resin prints, curing is non-negotiable—you can’t just pull a part out of the resin vat and use it; it’s still gooey and not fully cured. UV curing stations, the ones we supply, let you set a timer and uniform UV light to cure the entire part evenly, preventing sticky spots or parts that break easily. For FDM prints, some materials (like strong nylon parts) benefit from post-curing in an oven at a low temperature, which makes them more durable and less brittle. I’ve seen a user print a set of custom bike pedals, and without post-curing, they broke after a week; after curing, they’ve held up for six months.
Let’s not forget nozzle and maintenance tools. Nozzles wear out over time, especially if you’re printing abrasive materials like carbon fiber-filled filament. A clogged nozzle is one of the most common reasons for failed prints, and being able to clear it quickly saves you hours of downtime. We supply nozzle cleaning kits—including a nozzle puller, drill bits specifically sized for 3D printer nozzles, and a heat gun to soften filament before clearing. We also carry a range of hardened steel nozzles that last 5x longer than standard brass nozzles, perfect for users printing with abrasive materials.
You might be thinking, “This all adds up—do I really need all of this?” The short answer is: it depends on what you’re printing. If you’re just messing around with PLA test cubes as a hobby, you can get by with a basic bed leveler and maybe a cheap filament dryer. But if you’re printing functional parts, or even just consistent parts that you can rely on, auxiliary equipment is the difference between a fun hobby and a viable tool.
I’ve had regular customers tell me that switching to our filament dryer cut their filament waste by half, which saved them $300 a month. A startup that makes custom phone cases told me our enclosure let them print ASA parts that don’t crack when dropped, doubling their order volume. Even a hobbyist who prints miniatures for D&D told me our UV curing station made his miniatures look as good as the ones from professional services, so he started selling them locally.
Here’s the thing: 3D printers are amazing, but they’re only as good as the gear you pair them with. Skipping auxiliary equipment isn’t saving you money in the long run—it’s costing you in wasted materials, failed prints, and time you could be using to create things instead of troubleshooting.
If you’re a hobbyist looking to make your prints more reliable, a small business looking to scale your production, or someone who’s just tired of seeing their prints fail, we can help. We don’t just sell equipment—we’ve been where you are, we’ve seen the mistakes, and we know what works. Whether you need a filament dryer, an enclosure, ABL, post-processing tools, or nozzles, we’ve got gear that’s built for real use, not just marketing.

If you’re ready to stop wasting time and materials on finicky prints, and start getting consistent, high-quality results, reach out to us to discuss your needs. We’ll help you pick the right gear for your printer and your projects, no sales pitch, no overpriced items—just practical equipment that works.
Plastic Pipe Machine References
- ASTM International. (2020). Standard Guide for Additive Manufacturing: Fused Deposition Modeling (FDM) Processes. ASTM F2976-16.
- Gibson, I., Rosen, D. W., & Stucker, B. (2021). Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing (3rd ed.). Springer.
- Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014). Mechanical properties of 3D printed parts with fused deposition modeling. Materials & Design, 58, 422–428.
- Food and Drug Administration. (2022). Chemical Emissions From 3D Printers: Potential Risks and Mitigation Strategies. FDA.gov.
- ISO/ASTM International. (2019). Standard Terminology for Additive Manufacturing. ISO/ASTM 52900:2019.
Qingdao Tongsanhegu Plastic Machinery Manufacturing Co., Ltd.
With abundant experience, we are one of the most reliable auxiliary equipment manufacturers and suppliers in China. We warmly welcome you to buy durable auxiliary equipment for sale here from our factory. Quality products and reasonable price are available.
Address: West of Xixinzhi Village, Sanlihe District Jiaozhou, Qingdao City, Shandong Province, China
E-mail: info@tongsanhegu.com
WebSite: https://www.tongsanhegumachine.com/